产品[
ASKER Durometer Type C2L
]资料
如果您对该产品感兴趣的话,可以
产品名称:
ASKER Durometer Type C2L
产品型号:
C2L
产品展商:
日本高分子ASKER硬度计
会员价格:
0.00 元
关注指数:139
产品文档:
无相关文档
ASKER Durometer Type C2LASKER Durometer Type C2L
ASKER Durometer Type C2L
的详细介绍
广州市晶博电子有限公司 原装进口**。联系电话： 020-87589009ASKER Durometer Type C2L
The ASKER Durometer Type C2 for soft rubber, sponges, and other foam elastomers, as well as rolled-threads (yarn packages), etc. It is suitable for soft materials difficult to measure using the ASKER Type C.Features¦IndentorHeight: 2.54mm Shape: Spherical¦Hardness Tester Selection ChartOur product line consists of various types of durometers applicable to specific materials
as indicated in the chart above.
Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.
However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.
For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
SpecificationIndication range0 point - 100 point (262 degree dial scale)Minimum indication1 point (Accuracy : ±1 point)Indentor Design (mm)Height: 2.54 5.08 Dia. SphericalSpring Forces [mN(g)]0 point:539(55)100 point:4460(455)Central hole of diameter of Pressure footΦ5.5Pressure foot
Dimension (mm)Φ16 Longer foot type Length: 18Outer Dimension (mm)Approx. Width 57×Depth 30×Height 94Weight (g)200Applicationsoft rubber, urethane foam, sponge, rolled-threads, film rolls and pottery clay
Outer Dimension (mm)A custom designed pressure foot durometer is available according to specimen conditions.
Option Two-pointer type (max-hand and active hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easier to read and allows the creep characteristics of a specimen.
Accurate measurement is made possible for specimens* for which stress relaxation occurs over time or for specimens for which it is difficult to take readings from the front.
*Materials for which the reading decreases immediately after the indentor has been pressed against the surface. Constant Loader for Durometer
·Constant loarder assures uniform test pressure eliminating false readings due to differences between operators in measuring by hand.·High accuracy and repeatability of the hardness readings are assured by the flexible joint function. Indentor Extension Tester
·The gauge to check the indentor height on a durometer and the reading indicator mechanism.·Inspection is conducted at 2, 50, and 100 points respectively. ="
