产品[
日本ASKER橡胶硬度计长脚型
]资料
如果您对该产品感兴趣的话,可以
产品名称:
日本ASKER橡胶硬度计长脚型
产品型号:
AL
产品展商:
日本高分子ASKER硬度计
会员价格:
0.00 元
关注指数:165
产品文档:
无相关文档
日本ASKER橡胶硬度计长脚型日本ASKER橡胶硬度计长脚型
日本ASKER橡胶硬度计长脚型
的详细介绍
广州市晶博电子有限公司 原装进口**。联系电话： 020-87589009产品名称: ASKER橡胶硬度计长脚型
产品型号: AL
产品展商: 广州市腾明达精密仪器有限公司
简单介绍日本ASKER橡胶硬度计长脚型主要针对测试一些比较小的或者凹凸不平的接触面，产品质量保证5年，本公司是总代理提供零配件及维修保养服务。欢迎来电咨询。AL 型应用于一般橡胶、软质塑料（凹进部位）
主要针对测试一些比较小的或者凹凸不平的接触面，产品质量保证5年，公司提供零配件及维修保养服务。欢迎来电咨询。
ASKER橡胶硬度计长脚型的详细介绍
商品描述： 长压脚型可以测量狭小物体及凹进平面.JIS K 6253 、ASTM D 2240 、ISO 7619 、DIN53505
AL 型应用于一般橡胶、软质塑料（凹进部位）
测量范围:0-100, 测量精度: ±1 度, 荷重mN(g) 0 度550(56) 100 度8050(821)
产品名称: ASKER Durometer Type C1L
产品型号: C1L
产品展商: 广州市腾明达精密仪器有限公司
简单介绍
ASKER Durometer Type C1L The ASKER Durometer Type C, produced since 1956, is our original brand durometer, and is a de facto standard in the world for the measurement of soft rubber, sponges, etc.
ASKER Durometer Type C1L的详细介绍
ASKER Durometer Type C1L
The ASKER Durometer Type C, produced since 1956, is our original brand durometer, and is a de facto standard in the world for the measurement of soft rubber, sponges, etc.
Widely used for measuring soft rubber, sponges, and other foam elastomers, as well as rolled-threads, -films and textile windings (yarn packages). Features Indentor Height: 2.54mm Shape: Spherical Hardness Tester Selection Chart Our product line consists of various types of durometers applicable to specific materials
as indicated in the chart above.
Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.
However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.
For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
Specification Standards JIS K 7312
JIS S 6050 Indication range 0 point - 100 point (262 degree dial scale) Minimum indication 1 point (Accuracy : ±1 point) Indentor Design (mm) Height: 2.54 5.08 Dia. Spherical Spring Forces [mN(g)] 0 point: 539(55) 100 point: 8379(855) Central hole of diameter of Pressure foot Φ5.5 Pressure foot
Dimension (mm) f16 Longer foot type Length: 18 Outer Dimension (mm) Approx. Width 57×Depth 30×Height 94 Weight (g) 200 Application soft rubber, urethane foam, sponge, rolled-threads, film rolls and pottery clay, footwear
Outer Dimension (mm) A custom designed pressure foot durometer is available according to specimen conditions.
Option Two-pointer type (max-hand and active hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easier to read and allows the creep characteristics of a specimen.
Accurate measurement is made possible for specimens* for which stress relaxation occurs over time or for specimens for which it is difficult to take readings from the front.
*Materials for which the reading decreases immediately after the indentor has been pressed against the surface. Constant Loader for Durometer
· Constant loarder assures uniform test pressure eliminating false readings due to differences between operators in measuring by hand. · High accuracy and repeatability of the hardness readings are assured by the flexible joint function. Indentor Extension Tester
· The gauge to check the indentor height on a durometer and the reading indicator mechanism. · Inspection is conducted at 2, 50, and 100 points respectively. Load Tester for Hardness Tester
· Tester to check load properties of the spring on a durometer · Inspection is conducted at 2, 50, and 75 points respectively.
="
