产品[
日本PEACOCK孔雀量表 C-500 数显电子计数器
]资料
如果您对该产品感兴趣的话,可以
产品名称:
日本PEACOCK孔雀量表 C-500 数显电子计数器
产品型号:
C-500
产品展商:
日本孔雀Peacock
会员价格:
0.00 元
关注指数:85
产品文档:
无相关文档
日本PEACOCK孔雀量表 C-500 数显电子计数器日本PEACOCK孔雀量表 C-500 数显电子计数器
日本PEACOCK孔雀量表 C-500 数显电子计数器
的详细介绍
广州市晶博电子有限公司 原装进口**。联系电话： 020-87589009
日本PEACOCK孔雀量表 C-500 数显电子计数器日本PEACOCK孔雀量表 C-500 数显电子计数器日本PEACOCK孔雀量表 C-500 数显电子计数器日本PEACOCK孔雀量表 C-500 数显电子计数器日本PEACOCK孔雀量表 C-500 数显电子计数器
Equipped with large display functions and various measurement functions, our Digital Counters
can be installed in a Control Panel or placed on a desk due to their compact designs.
Specifications of Digital Counters Model C-500 C-700 Displayed digits
Selection of 10¿m
Selection of 1¿m Display -9999.99 -- 00.00 -- 9999.99 -999.999 -- 0.000 -- 999.999 High-luminance LED display with 7 segments (red) Power supply voltage
& power consumption AC100V -- AC240V
/ 9VA or lower Operating temperature 0 -- +40¿C Compatible Linear Gauges
Selection of 10¿m display
Selection of 1¿m display DL-2, D-5, D-10, D-20, D-30, D-50, D-100, DN-10, DN-20, D-5UZ DL-2S, D-5S, D-10S, D-20S, D-30S, D-50S, D-100S DN-10S, DN-20S Accessories AC power cord (2m) ; One cord Metal fittings for panel installation ; Two units
( to be used for installation in panel and securing stand fittings ) Stand fittings ; One unit
( to be used when counter is used as desktop device ) Terminal block functions
( Rear panel ) Terminal block --> Screwless terminal block Usable electric cables --> AWG22 - 28 Length of peeled wire of cables --> 8 - 9mm Pin alignment (*1) St/Sp Controls "START" and "STOP" of MAX, MIN, P-P
measurement mode. (*2) React Controls "SUSPEND" and "START" of P-P
measurement mode. 3 Latch Controls "LATCH" and "CANCEL" of measured value. 4 Reset External "RESET"
"PRESET" ( Function available only in Model No. C-700 ) 5 Alarm Error signal output
Max
Display Min
Display P-P
Display (*6) -NG Outputs -NG based on
OK±NG judgment (red LED). --> +NG(2) -NG(1) NG(2) (*7) OK Outputs OK based on
OK±NG judgment (green LED). --> OK OK OK (*8) +NG Outputs +NG based on
OK±NG judgment (orange LED). --> +NG(1) -NG(2) NG(1)
(1) : NG output in first stage
(2) : NG output in second stage 9 GND GND (* ) Circled numbers indicate functions available only in Model No. C-700 Dip sw setting functions
( Printed circuit board ) Dip(1)
Dip(2) SW 1 Select 1¿m or 10¿m
SW 1 Settings by Manufacturer SW 2 Select direction of
counting.
SW 2 Select whether or not to include
default values for OK±NG judgment. SW 3 Select activation or non-
activation of error output.
SW 3 Select either "orthogonal" or "sine"
for input waveform. SW 4 Select activation or non-
activation of overflow.
SW 4 Select either 400msec or 100msec
for RESET time. Data output (RS-232C)
D-Sub9P plug
INCH screw
Options
Excel input software
BCD output board Pin Alignment 1 NC --
Communication mode ; Half-duplexasynchronouscommunication 2 Rxd in <--
Communication speed ; 9600bps 3 Txd --> out
Format ; 7Bit ASCI I 4 NC --
Parity ; even number 5 SG --
Stop bit ; 1Bit 6 NC --
RTS / CTS ; Returned when not in use. 7 RTS --> out
Reception command ; Transmission request ASCI I [T] [t] 8 CTS in <--
; Reset ASCI I [R] [r]
9 NC --
Connection cables ; Cross cables ( not included )
PK-2002
; Data imported into Excel cells from RS-232C output. CB-BCD
; Cannot be used in combination with RS-232C output. Display functions 1/1 display --> Displays the measured value as is. 1/2 display --> Displays the measured value after halving it. ×2 display --> Displays the measured value after doubling it. Note ;
With 1¿m display and ×2 display, the lowest digit will be displayed as an even number. Presetting display function Zero setting only Can display preset values Measurement mode function
[MAX] [MIN] [P-P] --- Current value display Maximum
value (Max) RESET action is taken by
ST of the ST/SP control
terminal. Minimum
value (Min) Deflection
(P-P) OK±NG judgment function
( Refer to terminal output
circuit ) --- Current
value mode +NG OK -NG Maximum
value mode OK +NG (1) +NG (2) Minimum
value mode OK -NG (1) -NG (2) Deflection
mode OK NG (1) NG (2) Dimensions / Weight 144(W)×72(H)×160(D)mm / 950g
Time Chart [ Model No. C-700 ]
Control Terminal Input Circuit
Pin **** ST/SP Pin NO.2 REACT Pin NO.3 LATCH Pin NO.4 RESET
Terminal Output Circuit
Pin NO.5 ALARM Pin NO.6 -NG Pin NO.7 OK Pin NO.8 +NG
¦ Page Top ¦
Dimension of Digital Counters ( C-500, C-700 )
Panel cutting dimensions ; Panel thickness ( t = 1.6 - 3.2mm )
="
