产品[
日本PEACOCK孔雀量表 EG-1 外径测量计
]资料
如果您对该产品感兴趣的话,可以
产品名称:
日本PEACOCK孔雀量表 EG-1 外径测量计
产品型号:
EG-1
产品展商:
日本孔雀Peacock
会员价格:
0.00 元
关注指数:84
产品文档:
无相关文档
日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计
日本PEACOCK孔雀量表 EG-1 外径测量计
的详细介绍
广州市晶博电子有限公司 原装进口**。联系电话： 020-87589009
日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计日本PEACOCK孔雀量表 EG-1 外径测量计
Easy measurement of thickness, outer diameter, inner diameter and depth. Handy size with excellent functions.
Minimum reading : 0.1mm.
EG-1 for measurement of inner diameter, outer diameter and thickness.
EG-2 for measurement of inner diameter, outer diameter and thickness and depth.
How to use Snap Caliper ( EG-1, EG-2 ) To measure thickness and diameter of balls : (1) First, press down a knob to check whether a pointer shows 0. (2) As shown in the drawing II , put an object for measurement between a contact point
and anvil, and read a position of pointer on a dial plate. A division of scale is 0.1 mm,
so read the values on the dial 1, 2, 3... as 1, 2, 3 mm... ( After one rotation, it shows 11,
12, 13 mm... ) (3) One rotation of a pointer shows 10 mm. Check whether it is first or second rotation by
reading a spindle scale indication.
( Example ):A pointer shows 6 at your measurement:
1st rotation --> 6 mm, 2nd rotation --> 16mm To measure groove width and inner diameter : (1) Press down a knob and have a contact point and anvil contacted fast, then rotate an
outer frame of gauge so that a division of 3 on a dial plate meets a position of pointer. (2) Pressing down a knob by your fingers, insert the tips of contact point and anvil into the
inside of an object for measurement, and slowly release a knob, as shown in the
drawing III
( Notice ) :Measure an object at right angles to a groove. If you measure it diagonally,
a value larger than the actual one will be indicated. To measure depth and step depth -( EG-2 only is available. ) (1) Rotate an outer frame of gauge so that a pointer meets 0 on a dial plate, by putting
a flat plate on the reference level of gauge. ( If there is no adequate plate, put your
gauge upside down, and press the reference level of gauge on a flat table ). (2) Press your gauge down to the measuring part of an object for measurement, as
shown in the drawing IV Major Specifications (1) A division of scale 0.1mm (2) Measuring Range for measurement of thickness 0 ～ 20mm
for measurement of inner diameter 3 ～ 23mm
for measurement of depth 0 ～ 20mm (3) Weight EG-1 ; 97g EG-2 ; 100g Remarks
After your finising measurements of internal diameter and step depth, adjust a pointer so
as to meet 0 on a dial plate for thickness measurement.
="
